felipe041189
24-08-2008, 12:22 AM
Para acessar a função opcodes aperte Menu e digite 048263* sem pausas.
OBS.:¹ Se voce fizer isso e nao acontecer nada, é porque o menu Opcode nao esta ativado, para ativa-lo va no P2KTools (http://www.*******.com/file/22975573/f632ec5d/P2KTools.html?s=1) em seem editor e clique em Load From Phone, procure na linha 030 e a coluna 06, e marque o Bit 4, depois clique em Save to Phone e reinicie o cel, lembrando que pra entrar na téla de Opcodes, o cabo USB nao pode está conectado no cel
http://img223.imageshack.us/img223/2726/opcodehu5.jpg (http://img223.imageshack.us/img223/2726/opcodehu5.jpg)
OBS.:² Após digitar o opcode o resultado deverá ser sempre zero e a função só será habilitada depois que o celular for reiniciado.
1. Ativar a opção "Expira Depois" em configurações de mensagens:
Menu > Mensagens > Menu > Config. de Mensagem > (Expira Depois:):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 30 -> OK
Field 4: 1 -> OK
Field 5 (D): 066 -> OK
-> Desativar: Field 5 (D): 002 -> OK
Results
F1 : 0
2. Para quando acessarmos o menu principal aparecer selecionado o ícone central:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 107 -> OK
Field 4: 1 -> OK
Field 5 (D): 176 -> OK
-> Desfazer: Field 5 (D): 160 -> OK
Results
F1 : 0
3. Ativar a Rediscagem Automática:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 1 -> OK
Field 5 (D): 215 -> OK
-> Desativar: Field 5 (D): 211 -> OK
Results
F1 : 0
4. Ativar todas as opções de vibração: "Vibe Dot", "Vibe Dash", "Vibe Dot Dot", "Vibe Dot Dash" e "Vibe Pulse".
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 59 -> OK
Field 4: 1 -> OK
Field 5 (D): 252 -> OK
-> Desfazer: Field 5 (D): 168 -> OK
Results
F1 : 0
5. Desativar todas as opções de vibração:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 59 -> OK
Field 4: 1 -> OK
Field 5 (D): 128 -> OK
-> Desfazer: Field 5 (D): 168 -> OK
Results
F1 : 0
6. Habilitar a luz de fundo contínua:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 10 -> OK
Field 4: 1 -> OK
Field 5 (D): 255 -> OK
-> Desabilitar: Field 5 (D): 127 -> OK
Results
F1 : 0
7. Habilitar o menu Engenharia:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 68 -> OK
Field 4: 1 -> OK
Field 5 (D): 183 -> OK
-> Desabilitar: Field 5 (D): 007 -> OK
Results
F1 : 0
8. Corrigindo o volume.
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 125 -> OK
Field 4: 1 -> OK
Field 5 (D): 008 -> OK
-> Desfazer: Field 5 (D): 040 -> OK
Results
F1 : 0
9. Ativando Rhythm Lights:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 99 -> OK
Field 4: 1 -> OK
Field 5 (D): 253 -> OK
-> Desativar: Field 5 (D): 245 -> OK
Results
F1 : 0
10. Habilitar o menu Econ Bateria (economizar bateria):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 29 -> OK
Field 4: 1 -> OK
Field 5 (D): 120 -> OK
-> Desabilitar: Field 5 (D): 056 -> OK
Results
F1 : 0
11. Habilitar a opção Carregar de aplicativo Java (para passar jogos do computador p/celular):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 67 -> OK
Field 4: 1 -> OK
Field 5 (D): 247 -> OK
-> Desabilitar: Field 5 (D): 246 -> OK
Results
F1 : 0
12. Habilitar a opção Config. aplicação Standby (Se você estiver jogando no celular e receber uma ligação o jogo não será interrompido, apenas será mostrado no display quem está ligando):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 114 -> OK
Field 4: 1 -> OK
Field 5 (D): 099 -> OK
-> Desabilitar: Field 5 (D): 097 -> OK
Results
F1 : 0
13. Habilitar a opção Falar com Segurança no menu segurança:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 9 -> OK
Field 4: 1 -> OK
Field 5 (D): 255 -> OK
-> Desabilitar: Field 5 (D): 233 -> OK
Results
F1 : 0
14. Colocar User Code (Código de Desbloqueio) de volta à 1234:
Opcode: 47 -> OK
Field 1: 116 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 10 -> OK
Field 5 (D): 000 049 000 050 000 051 000 052 000 000 -> OK
Results
F1 : 0
15. Colocar Security Code (Código de Segurança) de volta à 000000:
Opcode: 47 -> OK
Field 1: 118 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 14 -> OK
Field 5 (D): 000 048 000 048 000 048 000 048 000 048 000 048 000 000 -> OK
Results
F1 : 0
16. Arrumar a tecla #:
Opcode: 47 -> OK
Field 1: 91 -> OK
Field 2: 1 -> OK
Field 3: 11 -> OK
Field 4: 1 -> OK
Field 5 (D): 011 -> OK
Results
F1 : 0
17. Zerar o Tempo de Vida:
Opcode: 47 -> OK
Field 1: 619 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 4 -> OK
Field 5 (D): 000 000 000 000 -> OK
Results
F1 : 0
18. Armazenar as mensagens no Celular e não no Chip:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 64 -> OK
Field 4: 1 -> OK
Field 5 (D): 191 -> OK
-> Desfazer: Field 5 (D): 255 -> OK
Results
F1 : 0
19. ESN ( Configurações > Status do Telefone > Outra informação ):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 11 -> OK
Field 4: 1 -> OK
Field 5 (D): 109 -> OK
-> Desabilitar: Field 5 (D): 108 -> OK
Results
F1 : 0
20. Mp3 Pronto ( Configurações > Status do Telefone > Outra informação ):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 69 -> OK
Field 4: 1 -> OK
Field 5 (D): 241 -> OK
-> Desabilitar: Field 5 (D): 113 -> OK
Results
F1 : 0
21. Pri checksum ( Configurações > Status do Telefone > Outra informação ) :
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 52 -> OK
Field 4: 1 -> OK
Field 5 (D): 104 -> OK
-> Desabilitar: Field 5 (D): 040 -> OK
Results
F1 : 0
22. Ativando a opção Brilho: Não dá para perceber alguma diferença quando se altera o brilho.
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 116 -> OK
Field 4: 1 -> OK
Field 5 (D): 064 -> OK
-> Desativar: Field 5 (D): 000 -> OK
Results
F1 : 0
23. Ativar a opção Linha Ativada no menu Status do Telefone:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 31 -> OK
Field 4: 1 -> OK
Field 5 (D): 247 -> OK
-> Desativar: Field 5 (D): 231 -> OK
Results
F1 : 0
24. Colocar os 4 ícones na tela igual ao V300 (isso removerá a data):
Primeiro digite esse opcode para habilitar esta opção
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 82 -> OK
Field 4: 1 -> OK
Field 5 (D): 163 -> OK
-> Desabilitar: Field 5 (D): 161 -> OK
Results
F1 : 0
Reinicie e digite esse outro para ativar as opções de configuração no menu Configurações > Personalizar > Tela Inicial > Teclas Principais
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 123 -> OK
Field 4: 1 -> OK
Field 5 (D): 128 -> OK
-> Desabilitar: Field 5 (D): 000 -> OK
Results
F1 : 0
25. Alterar o contraste:
Opcode: 47 -> OK
Field 1: 384 -> OK
Field 2: 1 -> OK
Field 3: 1 -> OK
Field 4: 1 -> OK
Field 5 (D): 028 -> OK
-> Desfazer: Field 5 (D): 032 -> OK
Results
F1 : 0
Você também pode colocar outros valores em Field 5 (D): 019, 021, 024 ou 026. Quanto menor o valor mais escuro fica.
26. Ativar o estilo de cor (spcolor.sch):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 83 -> OK
Field 4: 1 -> OK
Field 5 (D): 254 -> OK
-> Desativar: Field 5 (D): 190 -> OK
Results
F1 : 0
27. Desativar a animação original de inicialização:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 29 -> OK
Field 4: 1 -> OK
Field 5 (D): 048 -> OK
-> Ativar: Field 5 (D): 056 -> OK
Results
F1 : 0
28. Desativar a animação de original encerramento:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 49 -> OK
Field 4: 1 -> OK
Field 5 (D): 044 -> OK
-> Ativar: Field 5 (D): 045 -> OK
Results
F1 : 0
29. Ativar a opção Vibrar e Tocar ao mesmo tempo:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 122 -> OK
Field 4: 1 -> OK
Field 5 (D): 018 -> OK
-> Desativar: Field 5 (D): 000 -> OK
Results
F1 : 0
30. Ativar a opção Layout em Configurações > Personalizar > Tela inicial:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 116 -> OK
Field 4: 1 -> OK
Field 5 (D): 000 -> OK
-> Desativar: Field 5 (D): 016 -> OK
Results
F1 : 0
31. Alterar o formato da data:
Opcode: 47 -> OK
Field 1: 74 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 1 -> OK
1. 31 Dez -> ( Alterar para esse formato: Field 5 (D): 003 -> OK )
2. 12/31 -> ( Alterar para esse formato: Field 5 (D): 004 -> OK )
Obs.: Note que com esses formatos acima a opção de alterar a data não funcionará. Voltará sempre para o menu principal, ao contrário das opções abaixo.
1. 12/31/99 -> ( Desfazer para esse formato: Field 5 (D): 000 -> OK )
2. 31/12/99 -> ( Desfazer para esse formato: Field 5 (D): 001 -> OK )
3. 31-Dez-99 -> ( Desfazer para esse formato: Field 5 (D): 002 -> OK )
Results
F1 : 0
OBS.:¹ Se voce fizer isso e nao acontecer nada, é porque o menu Opcode nao esta ativado, para ativa-lo va no P2KTools (http://www.*******.com/file/22975573/f632ec5d/P2KTools.html?s=1) em seem editor e clique em Load From Phone, procure na linha 030 e a coluna 06, e marque o Bit 4, depois clique em Save to Phone e reinicie o cel, lembrando que pra entrar na téla de Opcodes, o cabo USB nao pode está conectado no cel
http://img223.imageshack.us/img223/2726/opcodehu5.jpg (http://img223.imageshack.us/img223/2726/opcodehu5.jpg)
OBS.:² Após digitar o opcode o resultado deverá ser sempre zero e a função só será habilitada depois que o celular for reiniciado.
1. Ativar a opção "Expira Depois" em configurações de mensagens:
Menu > Mensagens > Menu > Config. de Mensagem > (Expira Depois:):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 30 -> OK
Field 4: 1 -> OK
Field 5 (D): 066 -> OK
-> Desativar: Field 5 (D): 002 -> OK
Results
F1 : 0
2. Para quando acessarmos o menu principal aparecer selecionado o ícone central:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 107 -> OK
Field 4: 1 -> OK
Field 5 (D): 176 -> OK
-> Desfazer: Field 5 (D): 160 -> OK
Results
F1 : 0
3. Ativar a Rediscagem Automática:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 1 -> OK
Field 5 (D): 215 -> OK
-> Desativar: Field 5 (D): 211 -> OK
Results
F1 : 0
4. Ativar todas as opções de vibração: "Vibe Dot", "Vibe Dash", "Vibe Dot Dot", "Vibe Dot Dash" e "Vibe Pulse".
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 59 -> OK
Field 4: 1 -> OK
Field 5 (D): 252 -> OK
-> Desfazer: Field 5 (D): 168 -> OK
Results
F1 : 0
5. Desativar todas as opções de vibração:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 59 -> OK
Field 4: 1 -> OK
Field 5 (D): 128 -> OK
-> Desfazer: Field 5 (D): 168 -> OK
Results
F1 : 0
6. Habilitar a luz de fundo contínua:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 10 -> OK
Field 4: 1 -> OK
Field 5 (D): 255 -> OK
-> Desabilitar: Field 5 (D): 127 -> OK
Results
F1 : 0
7. Habilitar o menu Engenharia:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 68 -> OK
Field 4: 1 -> OK
Field 5 (D): 183 -> OK
-> Desabilitar: Field 5 (D): 007 -> OK
Results
F1 : 0
8. Corrigindo o volume.
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 125 -> OK
Field 4: 1 -> OK
Field 5 (D): 008 -> OK
-> Desfazer: Field 5 (D): 040 -> OK
Results
F1 : 0
9. Ativando Rhythm Lights:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 99 -> OK
Field 4: 1 -> OK
Field 5 (D): 253 -> OK
-> Desativar: Field 5 (D): 245 -> OK
Results
F1 : 0
10. Habilitar o menu Econ Bateria (economizar bateria):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 29 -> OK
Field 4: 1 -> OK
Field 5 (D): 120 -> OK
-> Desabilitar: Field 5 (D): 056 -> OK
Results
F1 : 0
11. Habilitar a opção Carregar de aplicativo Java (para passar jogos do computador p/celular):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 67 -> OK
Field 4: 1 -> OK
Field 5 (D): 247 -> OK
-> Desabilitar: Field 5 (D): 246 -> OK
Results
F1 : 0
12. Habilitar a opção Config. aplicação Standby (Se você estiver jogando no celular e receber uma ligação o jogo não será interrompido, apenas será mostrado no display quem está ligando):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 114 -> OK
Field 4: 1 -> OK
Field 5 (D): 099 -> OK
-> Desabilitar: Field 5 (D): 097 -> OK
Results
F1 : 0
13. Habilitar a opção Falar com Segurança no menu segurança:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 9 -> OK
Field 4: 1 -> OK
Field 5 (D): 255 -> OK
-> Desabilitar: Field 5 (D): 233 -> OK
Results
F1 : 0
14. Colocar User Code (Código de Desbloqueio) de volta à 1234:
Opcode: 47 -> OK
Field 1: 116 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 10 -> OK
Field 5 (D): 000 049 000 050 000 051 000 052 000 000 -> OK
Results
F1 : 0
15. Colocar Security Code (Código de Segurança) de volta à 000000:
Opcode: 47 -> OK
Field 1: 118 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 14 -> OK
Field 5 (D): 000 048 000 048 000 048 000 048 000 048 000 048 000 000 -> OK
Results
F1 : 0
16. Arrumar a tecla #:
Opcode: 47 -> OK
Field 1: 91 -> OK
Field 2: 1 -> OK
Field 3: 11 -> OK
Field 4: 1 -> OK
Field 5 (D): 011 -> OK
Results
F1 : 0
17. Zerar o Tempo de Vida:
Opcode: 47 -> OK
Field 1: 619 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 4 -> OK
Field 5 (D): 000 000 000 000 -> OK
Results
F1 : 0
18. Armazenar as mensagens no Celular e não no Chip:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 64 -> OK
Field 4: 1 -> OK
Field 5 (D): 191 -> OK
-> Desfazer: Field 5 (D): 255 -> OK
Results
F1 : 0
19. ESN ( Configurações > Status do Telefone > Outra informação ):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 11 -> OK
Field 4: 1 -> OK
Field 5 (D): 109 -> OK
-> Desabilitar: Field 5 (D): 108 -> OK
Results
F1 : 0
20. Mp3 Pronto ( Configurações > Status do Telefone > Outra informação ):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 69 -> OK
Field 4: 1 -> OK
Field 5 (D): 241 -> OK
-> Desabilitar: Field 5 (D): 113 -> OK
Results
F1 : 0
21. Pri checksum ( Configurações > Status do Telefone > Outra informação ) :
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 52 -> OK
Field 4: 1 -> OK
Field 5 (D): 104 -> OK
-> Desabilitar: Field 5 (D): 040 -> OK
Results
F1 : 0
22. Ativando a opção Brilho: Não dá para perceber alguma diferença quando se altera o brilho.
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 116 -> OK
Field 4: 1 -> OK
Field 5 (D): 064 -> OK
-> Desativar: Field 5 (D): 000 -> OK
Results
F1 : 0
23. Ativar a opção Linha Ativada no menu Status do Telefone:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 31 -> OK
Field 4: 1 -> OK
Field 5 (D): 247 -> OK
-> Desativar: Field 5 (D): 231 -> OK
Results
F1 : 0
24. Colocar os 4 ícones na tela igual ao V300 (isso removerá a data):
Primeiro digite esse opcode para habilitar esta opção
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 82 -> OK
Field 4: 1 -> OK
Field 5 (D): 163 -> OK
-> Desabilitar: Field 5 (D): 161 -> OK
Results
F1 : 0
Reinicie e digite esse outro para ativar as opções de configuração no menu Configurações > Personalizar > Tela Inicial > Teclas Principais
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 123 -> OK
Field 4: 1 -> OK
Field 5 (D): 128 -> OK
-> Desabilitar: Field 5 (D): 000 -> OK
Results
F1 : 0
25. Alterar o contraste:
Opcode: 47 -> OK
Field 1: 384 -> OK
Field 2: 1 -> OK
Field 3: 1 -> OK
Field 4: 1 -> OK
Field 5 (D): 028 -> OK
-> Desfazer: Field 5 (D): 032 -> OK
Results
F1 : 0
Você também pode colocar outros valores em Field 5 (D): 019, 021, 024 ou 026. Quanto menor o valor mais escuro fica.
26. Ativar o estilo de cor (spcolor.sch):
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 83 -> OK
Field 4: 1 -> OK
Field 5 (D): 254 -> OK
-> Desativar: Field 5 (D): 190 -> OK
Results
F1 : 0
27. Desativar a animação original de inicialização:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 29 -> OK
Field 4: 1 -> OK
Field 5 (D): 048 -> OK
-> Ativar: Field 5 (D): 056 -> OK
Results
F1 : 0
28. Desativar a animação de original encerramento:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 49 -> OK
Field 4: 1 -> OK
Field 5 (D): 044 -> OK
-> Ativar: Field 5 (D): 045 -> OK
Results
F1 : 0
29. Ativar a opção Vibrar e Tocar ao mesmo tempo:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 122 -> OK
Field 4: 1 -> OK
Field 5 (D): 018 -> OK
-> Desativar: Field 5 (D): 000 -> OK
Results
F1 : 0
30. Ativar a opção Layout em Configurações > Personalizar > Tela inicial:
Opcode: 47 -> OK
Field 1: 50 -> OK
Field 2: 1 -> OK
Field 3: 116 -> OK
Field 4: 1 -> OK
Field 5 (D): 000 -> OK
-> Desativar: Field 5 (D): 016 -> OK
Results
F1 : 0
31. Alterar o formato da data:
Opcode: 47 -> OK
Field 1: 74 -> OK
Field 2: 1 -> OK
Field 3: 0 -> OK
Field 4: 1 -> OK
1. 31 Dez -> ( Alterar para esse formato: Field 5 (D): 003 -> OK )
2. 12/31 -> ( Alterar para esse formato: Field 5 (D): 004 -> OK )
Obs.: Note que com esses formatos acima a opção de alterar a data não funcionará. Voltará sempre para o menu principal, ao contrário das opções abaixo.
1. 12/31/99 -> ( Desfazer para esse formato: Field 5 (D): 000 -> OK )
2. 31/12/99 -> ( Desfazer para esse formato: Field 5 (D): 001 -> OK )
3. 31-Dez-99 -> ( Desfazer para esse formato: Field 5 (D): 002 -> OK )
Results
F1 : 0